Expert knowledge, tailoredsupport.

At BRESITEC, we design and manufacture highly wear-resistant crusher parts, developed from our own drawings and inspired by original equipment parts.

Through close collaboration with users and our strong technical expertise, we optimise each design to meet real on-site requirements.

Our customised solutions are designed to sustainably improve the performance, reliability and profitability of your installations. We can also adapt each part to your specific needs: technical modifications, performance improvements or increased equipment lifetime.

If you do not have drawings of your parts, no problem. Our team can visit your site to take the necessary measurements and then provide you with a fully customised quotation, completely free of charge and with no obligation.

1. 1. Wooden Pattern : Based on our drawings, our foundry partner manufactures wooden patterns. These patterns are used to produce the mould, which gives the steel casting its final shape during the pouring process.
2. 2. Sand Mould : Sand moulds are produced by compacting sand around wooden patterns. After the pattern is removed, the mould is assembled and prepared for the pouring of molten metal.
3. 3. Casting : Once the steel has been melted at a temperature of approximately 1,500°C, the alloy composition is checked and adjusted if necessary by adding elements such as chromium, manganese and carbon. After validation, the molten steel is poured into the sand mould, where it takes the final shape of the part.
4. 4. Heat Treatment : After pouring, the parts undergo heat treatment to improve their mechanical properties and achieve a high and uniform hardness, enabling them to withstand heavy impacts, including those from rocks up to 800 mm in size.
5. 5. Machining  : The contact surfaces of the parts are then machined to ensure a precise fit and optimal installation in the machine.
6. 6. Stock  : Finally, the parts are received in our warehouse, ready to be installed on our customers’ machines.